Skip to content

Organisation Description

Schneider Electric is a multinational corporation that specializes in electricity distribution automation management and produces installation components for energy management.

CPD Courses and Workshops Available

  • Active Energy Efficiency Using Speed Control

    Training Course | Schneider Electric Ltd

    The focus of this course is to explore the different ways we can control motor speed efficiently and with minimal physical stress on equipment. In addition, we'll discuss other advantages such as controlled starting and regulated torque.

  • Alternative Power Generation Technologies

    Training Course | Schneider Electric Ltd

    This course will review fuel cells and micro turbines as possible alternatives for data centre and network room power generations. The benefits and drawbacks of multiple power generation approaches will be highlighted.

  • An Introduction To KNX

    Seminar | Schneider Electric Ltd

    Seminar provides an introduction to the knx system and how it can be part of an energy efficiency strategy. Reviews hardware, typical configurations and system capabilities.

  • Building Controls I - An Introduction To Building Controls

    Training Course | Schneider Electric Ltd

    Have you ever been in a meeting in a conference room where the room was just too hot? Or too cold? Did you find it uncomfortable and hard to concentrate? Have you ever considered how much money is wasted when things like that are not addressed? Whats the solution? The control system within a building is very important to the energy efficiency of the building, and also to the comfort of the buildings occupants. In this class, we will learn a simple definition of a control system, learn the components of a control system, and describe some fundamental types of control and control loops.

  • Building Controls II - Control Sensors

    Training Course | Schneider Electric Ltd

    Building control systems are important facets in any buildings energy management plan. They help avoid waste and save money. A vital component of a control system is the sensors that are incorporated into the system. We must measure what we wish to control. We need to have a way to make measurements accurately and repeatedly. Sensors measure the data that the controller uses to make decisions based on its set of programmed standards and set points. Sensors are the first step of control. This course provides an overview of the various sensors integrated in a building control system, and looks at the variety of designs and need for correct placement.

  • Building Controls III - Introduction To Control Loops

    Training Course | Schneider Electric Ltd

    The purpose of this course is to provide you with an overview of basic building control technology used in buildings, so that you will understand how building controls can contribute to energy efficiency. We will examine the five controller loop responses and review the terms associated with controller loop responses.

  • Building Envelope

    Training Course | Schneider Electric Ltd

    The building envelope is a critical component of any facility since it protects the building occupants and plays a major role in regulating the indoor environment. Consisting of the building's foundation, walls, roof, windows, and doors, the envelope controls the flow of energy between the interior and exterior of the building. A well designed envelope allows the building to provide comfort for the occupants and respond efficiently to heating, cooling, ventilating, and natural lighting needs.

  • Cable Management Systems: Commercial Solutions

    Seminar | Schneider Electric Ltd

    Seminar covers solutions for the management of power, data and voice cables throughout commercial buildings. Reviews solutions from the distribution board to desk with a view to ensuring maximum flexibility and future-proofing.

  • Cascading And Discrimination

    Seminar | Schneider Electric Ltd

    Seminar addresses the co-ordination techniques as specified by bsen 60947-2 and gives a better understanding of cascading, discrimination and limitation effects of circuit breakers.

  • Combined Heat And Power (Cogeneration)

    Training Course | Schneider Electric Ltd

    Cogeneration today is widely used throughout the world for efficient production of heat and power. Cogeneration is the simultaneous production of heat and power in a single thermodynamic process. The purpose of this course is to review the different approaches for applying technologies to the function of cogeneration. We?ll also explore the various issues and considerations for deployment of the two main types of cogeneration concepts; topping cycle; plants (including combined cycle plants), and bottoming cycle plants.

  • Commissioning For Energy Efficiency

    Training Course | Schneider Electric Ltd

    Commissioning is a process to ensure building performance problems are understood and corrected. Deficiencies such as design flaws, construction defects, malfunctioning equipment, and deferred maintenance have a multitude of consequences, ranging from equipment failure, to poor indoor air quality and comfort, to unnecessarily high energy use or under-performance of energy efficiency strategies. Fortunately, an emerging form of quality assurance, known as building commissioning, can identify and cure most deficiencies. This course will explain the purpose of a commissioning process, and discuss the impact of the commissioning process on energy efficiency.

  • Data Center Efficiency: Reducing Electrical Power Consumption

    Training Course | Schneider Electric Ltd

    The course will explain how to quantify the electricity savings and provide examples of methods that can greatly reduce electrical power consumption.

  • Demand Response And The Smart Grid

    Training Course | Schneider Electric Ltd

    This course will review how demand response works, why it is beneficial and what the smart grid is.

  • Deploying Powerline Networking As A Whole Home Solution

    Seminar | Schneider Electric Ltd

    Seminar provides a competent understanding of powerline networking and installation of high speed and reliable data networks. Explains how the integration of the system within existing services helps reduce costs and avoids the disruption of installing additional cabling or reliance on Wi-Fi networks.

  • Distributed Generation

    Training Course | Schneider Electric Ltd

    Due to recent electricity market liberalization and on-going concerns regarding the cost of electricity as well as efforts towards environmentalism; distributed generation is experiencing a renewed interest throughout the world. Distributed generation is generally defined as small-scale electricity generation and is used to provide an alternative to or an enhancement of the traditional electric power system. The purpose of this course is to discuss the various small-scale generation technologies that exist today and then move on with a discussion of the major benefits and issues of distributed generation.

  • Efficient Motor Control With Power Drive Systems

    Training Course | Schneider Electric Ltd

    In buildings, nearly three quarters of the electricity consumed is used to turn motors. For a typical motor, the lifetime energy bill is equivalent to 100 times the cost of the motor itself. The money invested in motors, is merely 1% of their total cost. Installing and maintaining those motors accounts for only 2% of overall motor costs. 97% of costs associated with motors are spent on the energy required to operate them. This course will provide an overview of power drive systems and motors along with insight on efficiency. This course will also cover, gears – types, efficiency and maintenance.

  • Energy Audits

    Training Course | Schneider Electric Ltd

    This course will review the different types of audits, the overall auditing process as well as the auditing methodology which will help prepare you to successfully participate in the energy audit process.

  • Energy Audits Instrumentation I

    Training Course | Schneider Electric Ltd

    This course will review electrical, lighting, temperature and humidity measurement instruments that are used in energy audits.

  • Energy Audits Instrumentation Ii

    Training Course | Schneider Electric Ltd

    As a continuation of energy audits instrumentation, the purpose of this course is to review the measurement instruments used in energy audits in order to select and employ the appropriate instrument for your auditing needs.

  • Energy Efficiency Fundamentals

    Training Course | Schneider Electric Ltd

    This course is extremely important in understanding building energy use and energy efficiency measures that customers can implement to save energy and money in their facilities.